Our products are dynamic and since it’s constantly updating, we decided to just put the items on our website--- www.ssehua.com. There, you can choose from our wide range of products depending on your office needs--- seating, partitions, office tables, filing cabinets, and other office essentials.
We started in 2011 as Jecams Enterprises. Then the company incorporated in 2016 and formally became Jecams Inc.
Contractor. In fact we are accredited by the Philippine Contractors Accreditation Board (PCAB), as all contractors in the country must first secure a license before undertaking construction under the Republic Act 4566 otherwise known as the Contractors’ License Law .
Yes, although our products are a combination of imported and manufactured items.
Yes, our production area is in Novaliches, Quezon City where the head office is also located.
Our products are moving in full swing due to the demand. That’s why we always have to check our inventory first before we can confirm if the product is available or not.
Yes, we produce steel tables and cabinets.
Yes. Since our accreditation from the Philippine Contractors Accreditation Board (PCAB) in 2015, we have completed numerous office fit out and turnkey projects --- offering a complete solution to office productivity and creating an efficient environment.
Yes, if the terms of service satisfy both Jecams and the client.
We carry out a total solution for office fit out --- space planning, floor layout, 3D rendering, implementation and construction, commissioning and testing. This includes architectural, electrical, civil, structured cabling, plumbing, fire protection, mechanical, air conditioning system installation, custom furniture and workstation systems, and other related services.
Jecams caters both fit out service and production of modular furniture resulting to seamless implementation of your office requirement. We design offices, space plan, construct and install furniture. In short, we handle everything from start to finish. This means you only have one point-of-contact.
It would take at least 30 to 45 days, but may take longer depending on the extent of the area.
Yes, upon the instruction of the client.
We can present the final layout in 3 to 7 days.
Yes. We’ll be happy to tour you around our site.
Yes, permit acquisition is one of the services we can help you with.
Yes, you can choose another one. We have 28 Sales Executive as of yet and the number is expected to grow in the next few months.
For high-end series, we exclusively tie-up with Marshallord.
We import our chairs from countries within Asia--- Taiwan, Malaysia, Thailand, China and Vietnam.
Only if the chairs were originally purchased from us.
Yes, all our chairs provide optimum comfort.
Yes, we actually recommend it even for small orders.
Replacements can be provided if it’s due to product failure or failure to abide by specifications, or if the item or items is/are defective.
In case of cancellation seven (7) days after the issuance and receipt of the Purchase Order, we impose a penalty of thirty percent (30%) on all items returned after delivery/ installation.
Only changes in design or specifications are allowed but it’s subject to price adjustment as the parties may agree. On the contrary, a change of mind on the part of the client shall not entitle them to an exchange or refund under Republic Act 7394, otherwise known as “The Consumer Act of the Philippines.”
Availability of stocks should be determined 10 days from the date of proposal, subject to a written confirmation. It may also vary without prior notice.
Yes we do, but there are imported items too.
Yes. We are committed to provide products of adequate value so we ensure that our final products passed our quality standard.
Planning for wood finishing also involves thinking about the properties of the wood that you are going to finish, as these can greatly affect the appearance and performance of finishes, and also the type of finishing system that will give the wood the characteristics you are seeking. With ours, we use powder coating, wet paint, laminates, duco to name a few.
We provide a maximum warranty of 1 year except for high-end system, like the Marshallord Series.
Since our chairs are imported, this happens only if the original manufacturer does not provide us with warranty. But Jecams now offers in-house warranty for as long as three (3) months for most of our chairs.
We can provide warranty certificate upon request.
Basic warranty as stated by Philippine Law is set to a minimum time frame of six (6) months and a maximum time frame of one (1) year. There's also an in-house warranty (example: 7-day warranty). This type of warranty is an independent service given by a company out of generosity. Those items that have shorter warranties are covered only by Jecams’ in-house warranty.
Yes, but only if it was purchased from us and if it’s still under warranty. Fees may apply for those that are beyond warranty.
A standard one (1) year manufacturer’s warranty against factory defect from date of delivery in parts and services shall apply. To ascertain the actual date of delivery, that appearing in the Delivery Receipt shall prevail. Further, the warranty does not include upgrades and relocation, damage to items caused by accident, improper use or abuse of the items, alterations, scratches, dents or repairs done by a person other than Jecams Inc. Service Agents, usage of component parts not supplied by Jecams Inc., poor operating environment, fire and other natural calamities. Fabrics, leatherette, mesh, and the likes are not included in the warranty.
Our Sales Team is always willing to assist you with your queries and concerns. Visit our Contact Us page to get our contact information. Click here.
We have the widest selection of office furniture--- seating, partitions, office tables, filing cabinets, and other office essentials. We are not just an office furniture company; we handle everything from start to finish. We also carry out a total solution for office fit out --- space planning, floor layout, 3D rendering, implementation and construction, commissioning and testing. This includes architectural, electrical, civil, structured cabling, plumbing, fire protection, mechanical, air conditioning system installation, custom furniture and workstation systems, and other related services. We are a one-stop shop for all your office needs.
Yes, as mandated by the Philippine law. A person or entity that offers sale of goods or properties or services should be VAT-registered.
Yes, provided they present a copy of their certification.
The durability of furniture varies according to the material used for making it. Metal furniture is more durable compared to wooden and plastic furniture. All our products are of great quality but its durability would mainly depend on its usage and maintenance.
We watch the safety of our team. There are protective measures we enforced to ensure that accident, injury or death does not occur in the work place during the course of installation.
Yes, although any damages incurred during installation caused by service agents other than that of Jecams are not included in the warranty.
Yes, although any damages incurred during assembly caused by service agents other than that of Jecams are not included in the warranty.
We are committed to producing quality products and providing exceptional services. Our team also provides great after-sales support.
We send it through email as a PDF file. But you can simply approve the quotation by replying to the email with your confirmation.
Yes, but it will be subjected to management’s approval.
By signing on the conforme part of the quotation which would mean you have read, understood and agreed with our terms and conditions.
Bill of Materials (BOM) will be sent after we received your confirmation or your Purchase Order.
Yes, especially for fit out solution. The project is usually divided into two components. One agent will handle the supplies and one will handle the actual fit out.
Yes, but we honor VAT-exempt companies provided they present a valid certification.
If it’s within Metro Manila, delivery is free of charge but if it’s in provincial areas, a forwarder suggested and chosen by the client shall make the actual delivery. Therefore, it’s up to the forwarder how much it will charge the client. The responsibility over the items will be then transferred to the forwarder.
For Standard Items, delivery shall be made within a period of 10-15 working days upon receipt of the purchase order, down payment and complete specifications. For Indent Items, it can be within a period of 45-60 working days.
We have flexible payment terms that we offer:
You can pay through cash, check, bank deposit and online bank transfer.
To properly set the expectation, the standard timeframe is 30-45 days, but we always try to expedite it to meet our client’s deadline.
Please visit our blog page for tips on how to properly care for your furniture.